TWO-POST LIFTS
BP9
F10
i10
F12
i12PRO
DP15
DP15PRO
DP18
DP18PRO
Experienced Two-Post Lift Distributor Serving California & the Greater Las Vegas Area
If your shop regularly does wheel and tire work, a two-post lift is probably your best option. With the ability to keep wheels free while accessing the undercarriage of the vehicle, a high-quality two-post lift can take your garage to the next level. Shop Equipment USA is a two-post lift distributor and authorized dealer for both Direct Lift and Forward Lift. We make it our business to get you the gear you need!
Symmetrical Two-Post Lifts
Symmetrical lifts put the vehicle in the center of the bay for better access. Since columns are positioned across from one another, the lift has more clearance underneath. When the vehicle’s center of gravity and the lift are aligned, the load on the car or truck and the lift are balanced. A symmetrical lift is ideal for large vehicles like trucks and vans.
Asymmetrical Two-Post Lifts
Asymmetrical lift columns rotate and have arms of different lengths, making it much easier to lift each vehicle in such as way as to be able to access its interior. The columns align the center of gravity of the vehicle with the lift, making it ideal for lifting cars, light trucks and other passenger vehicles.
Open Up Your Options With Spot-Rite™ 3-Stage Front Arms
If you work on all kinds of vehicles, you may need both asymmetrical and symmetrical lifting capability. Spot-Rite™ 3-Stage Front Arms allow you to switch between the two depending on the situation. These frame-engaging, rubber-padded truck adapters allow the technician to position the vehicle doors in front of or behind the column to prevent damage from door opening.
Forward Lift BP9
View The Brochure or Manual
PRODUCT SPECS
- Capacity 9,000 lbs. (4082kg)
- Overall Height 111-1/4″ (2825mm)
- Overall Width 138-1/2″ (3517mm)
- Rise 72″ (1828mm)
- Maximum Rise 80-1/2” (2044mm) w / 5” extension
- Drive Through Clearance 97-1/4″ (2470mm)
- Width Inside column 111″ (2819mm) Arm
- Reach (Min/Max) 30″ / 46-1/4″ (762mm/1174mm)
- Minimum Adapter Height 4-1/2″ (114mm)
- Drive-over Height 1-1/2″ (38mm)
- Voltage/Amps 208V/230V, 17 amps
- Motor/Phase 1ph/2HP Ceiling Height
- Required 113″ (2870mm)
FEATURES
- Dual hydraulic cylinders
- Low-Profile Threaded Adapters
- Carriage latch system – engages every 3″
- Secondary lock system includes a spring actuated slack chain locking device
- Adapter extensions included
- Powder coat, oven baked finish
PRODUCT DESCRIPTION
The BP9 9,000 lbs. capacity lift is perfect for customers who need a two-post lift and have low ceilings. The BP9’s overall height is 111 1/4 inches tall. That means it will fit, even if you have 10 foot ceilings. The BP stands for base plate indicated by the steel plate that run between the two columns of the lift. This plate protects the cables that would normally run overhead on any other two-post lift. This allows for shorter columns, hence the lower ceiling height requirement.
This is a commercial grade car lift and should not be confused with any other cheap two-post vehicle lift. This is a Forward Lift® so it has been engineered to perform and built to last!
Contact Us For Pricing Information
Forward Lift i-10
View The Brochure or Manual
PRODUCT SPECS
- Lift Capacity: 10,000 LBS.
- Tower Height: 143-1/8″(11’11”1/8”)
- Height to Shutoff: 136”-1/4 (11’1/8”)
- Minimum Ceiling Height: 144” (12’)
- Minimum Lifting Height: 77” (6’5”)
- Outside Tower Width: 137″ (11’5”)
- Inside Tower Width: 115 3/4″ (9’7 ¾”)
- Electrical: 220 Volt, 20 Amp.
- Maximum Pad Height: 79″
- Minimum Pad Height: 4.5″
- Ship Weight: 1,750 Lbs.
- Drive Through: 103” (8’7”)
- Adapter Heights: 1-1 1/2” 3” and 6”
FEATURES
- Lift capacity 10,000 lbs.
- Third party tested by ETL and certified by ALI
- Direct-Pull Lifting
- Hydraulic cylinders in each column
- Powder coat, oven baked finish
- Spot right 3 stage arm design
- Padded shut-off bar
- Spring operated arm restraints, disengage at floor level
- Low profile arms
- Includes truck adapters
- Single point release lock
PRODUCT DESCRIPTION
The Forward I10 is a ETL/ALI-certified heavy duty commercial grade lift with 10,000-pound capacity. Designed for high volume shops, the I10 offers 3-stage Spot-Rite arms that allow lifting either symmetrically or asymmetrically. The extra-low 3 5/8” pad height allows the arms to swing easily under low vehicles. With a versatile combination of features, it’s ideal for cars with a small wheelbase, and for quad-cab pickup trucks. The oven-baked powder coat finish is tough and durable, and Forward Lifts carry warranties of 18-months on parts, 5-years on structure, and 6 months on labor.
The Forward I10 is manufactured by the VSG division of Dover Corp., a Fortune 300 company headquartered in Madison Indiana. Dover is the largest lift manufacturer in the world, with ISO9001-certified manufacturing factories worldwide. Dover also owns the Rotary Lift, Direct Lift, Forward Lift, and Revolution Lift brands.
Contact Us For Pricing Information
Forward Lift i12PRO
View The Brochure or Manual
PRODUCT SPECS
- Capacity 12,000 lbs. (5443kg)
- Maximum Rise with 5”
- Extension 80-3/4” (2051mm)
- Adjustable Overall Height Options I12N300 166” (4216mm)
- Standard I12N301 178″ (4521mm)
- Max. Height I12N302 154″ (3912mm) I12N303 143″ (3632mm)
- Overall Width 140” (3556mm) or optional 146” (3708mm)
- Drive through clearance 108-3/4″ (2762mm) or optional 102-3/4″ (2610mm)
- Overhead Switch Height Options I12N300 160-1/8″ (4067mm)
- Standard I12N301 172-1/8″ (4524mm)
- Extended I12N302 148-1/8″ (3762mm) I12N303 137-1/8″ (3483mm)
- Front Reach (Min/Max) 27-3/4″ / 59″ (705mm/1460mm)
- Rear Reach (Min/Max) 27-3/4″ / 59″ (705mm/1460mm) Min/Max Adapter Height 4-3/4″ (121mm) w/o extension 9-3/4″ (248mm) w/5″ extension
- Width inside Columns 120-7/8″ (3070mm) Adjustable 114-7/8″ (2918mm)
- Standard Voltage/Amps 208V/230V, 17 amps Motor/Phase 1ph/2HP/50Hz; 1ph/2HP/60Hz
- Ceiling Height required 168″ (4267mm)
FEATURES
- Hydraulic cylinders in each column
- Full Stroke
- Cylinder rod concealed inside carriage
- 75-3/4″ Rise | 80-3/4″ (With 5″ adapter extensions)
- 3 Stage arm design
- Door Bumper Kits Standard
- Overhead cable equalization
- Single Point lock release
- Large rubber-padded drop-in adapter with extra height extensions (1.75″, 3.5″ and 5″) are standard
- Spring operated arm restraints, disengage at floor level
- Padded overhead height limit switch bar
- Durable powder coat finish
PRODUCT DESCRIPTION
Forward’s I12PRO two-post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks and vans. With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time. Cylinders are located in each column concealed within the carriage itself. Durable powder coat finish provides exceptional protection from the wears a shop will see over the years. Forward’s spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak performance.
Contact Us For Pricing Information
Forward Lift F10
View The Brochure or Manual
PRODUCT SPECS
- 10,000 lbs. capacity for raising most passenger cars, trucks and vans.
- Third party tested by ETL and approved by ALI.
- 3-stage front and 2-stage rear arms
- Adapter storage bracket kit
- Hydraulic cylinders in each column:Direct pull lifting technology
- Top mounted
- Full stroke
- Cylinder rod concealed inside carriage
FEATURES
- Symmetrical column design Versatile 3-stage front and 2-stage rear arms
- Top mounted Direct-Pull lifting technology
- Cylinder rod concealed inside carriage
- Adjustable width options
- Optional extended height kit adds 2’
- Single point lock release
- Powder coated finish
- Includes adapter storage bracket
- ALI Certified
PRODUCT DESCRIPTION
The F10 Two-Post Lift Features frame engaging rubber padded truck adapters with multiple adapter extensions to raise most vehicles on the road today. Includes four of each of the following extensions: 3.5″ and 5″
Contact Us For Pricing Information
Forward Lift F12
View The Brochure or Manual
PRODUCT SPECS
- Capacity: 12,000
- Maximum Rise: 77 3/4″ with 5″ adapter
- Overall Height: 178″
- Overall Width: 146″
- Drive Through: 108 3/4″
- Overhead Switch: 172″
- Reach: 35″ -54″
- Rear Reach: 35″-54″
- Adapter Height: 3 1/2″ and 5″ adapters
- Adapter Height: 8 1/2″ max
- Width Inside Column: 120 7/8″
- Voltage/Amps: 208/230, 16 amps
- Motor/Phase 1ph* 2HP 60Hz
- Ceiling Height Min: 168″
FEATURES
- Hydraulic cylinders in each column
- 72-1/2″ Rise 77-3/4″ Rise (With 5″ adapter extensions)
- Overhead cable equalization
- Single Point lock release
- Large rubber-padded swivel adapter with adapters (3.5″ and 5″)
- Spring operated arm restraints, disengage at floor level
- 2-stage front and rear arms
- Durable powder coat finish blue with yellow arms
- Warranty 60 day labor, 18 months parts, 5 year structural
- ALI Certified
PRODUCT DESCRIPTION
The Forward F12 is a heavy duty, 12,000 pound capacity 2-post lift that’s ETL/ALI Certified to meet all US lift standards. With symmetric arms ideal for servicing and maintaining heavy duty trucks and fleet vehicles, the sturdy overhead structure has a padded automatic shut-off switch at 14’ 4” for taller vehicles. The Forward F12 comes with four 3 1/2” and four 5” truck adapters and an 18-month parts, 60-day labor, and 5-year structure warranty.
The Forward F12 is manufactured by the VSG division of Dover Corp., a Fortune 300 company headquartered in Madison Indiana. Dover is the largest lift manufacturer in the world, with ISO9001-certified manufacturing factories worldwide. Dover also owns the Rotary Lift, Direct Lift, Forward Lift, and Revolution Lift brands.
Contact Us For Pricing Information
Forward Lift DP15
View The Brochure or Manual
PRODUCT SPECS
- Capacity: 15,000 lbs.
- Maximum Rise: 83″
- Overall Height: 175″
- Overall Width: 154 3/8″
- Inside Column Width 119 5/8″
- Drive Through: 108 1/4″
- Overhead Switch: 167 1/4″
- Reach: 38″-61″
- Adapter Height: 5 1/2″ to 101/2″
- Adapter Height: 15 1/2″ max
- Voltage/Amps: 208/230, 20 amps
- Motor/Phase 1ph* 2HP /10
- Ceiling Height Min: 176″
FEATURES
- Direct pull lifting
- Closed loop hydraulic system
- Powder coat paint
- Certified ALI/ETL
- Padded shut off bar
- Low profile arms
- Single point lock release
PRODUCT DESCRIPTION
The DP15 is constructed of high strength heavy gauge steel columns. Large gusseting on substantial base plate foundations provide the stability and support you want for a heavy truck lift. With a capacity of 15,000 pounds, your shop can start working on work trucks, vans, or small buses along with everything else that rolls through the door.
Contact Us For Pricing Information
Forward Lift DP15Pro
View The Brochure or Manual
PRODUCT SPECS
- Capacity 15,000 lbs. (6804kg)
- Minimum Rise 73-1/4” (1860mm)
- Max. Rise with 10” (254mm)
- Adapter Extensions 83-1/4″ (2120mm)
- Height to Shut-Off
- 147-1/4″ (3735mm) Low Ceiling
- 167-1/4” (4248mm) Standard Extension
- 191-1/4” (48514mm) Extended Height
- Overall Floor Width 154-3/8″ (3921mm)
- Width Inside Columns 119-5/8″ (3038mm)
- Drive Through Clearance 108-1/4″ (2750mm)
- Arm Reach (Min/Max) 30”/ 61” (762mm/1549mm)
- Threaded Adapter Height
from Floor (Min/Max) 5-1/2″ to 7-1/2” (139mm) - Max. Adapter Height
with 10″ Extension 15-1/2″ (393mm) - Voltage/Amps 208V/230V, 17 amps
- Motor/Phase 1ph/2HP
THREE OVERALL HEIGHT OPTIONS
- DP15PNOOOBL 154-3/4” (3930mm) Low Ceiling
- DP15PNOO1BL 175” (4445mm) Standard Extension
- DP15PNOO2BL 199” (5054mm) Extended Height
MINIMUM REQUIRED CEILING HEIGHT
- DP15PNOOOBL 155-3/4” (3956mm) Low Ceiling
DP15PNOO1BL 176” (4470mm) Standard Extension
DP15PNOO2BL 200” (5080mm) Extended Height
FEATURES
- 15,000 lbs. capacity for raising most trucks and vans.
- Features symmetrical column design
- Direct-Pull Lifting – high efficiency, low maintenance technology
- Closed-loop hydraulic system – protects against hydraulic contamination
- Powder coat paint is more durable than conventional coatings
- Third-party tested and certified by ALI
- Padded shut-off bar
- Low profile arms and truck adapters
- Single point release lock at the operations center
PRODUCT DESCRIPTION
The DP15Pro is constructed of high-strength heavy gauge steel columns. Large gusseting on substantial base plate foundations provide the stability and support you want for a heavy truck lift. With a capacity of 15,000 pounds, your shop can start working on work trucks, vans, or small buses along with everything else that rolls through the door.
Truck Adapter Extensions:
The DP15Pro comes with eight aircraft grade aluminum truck adapter extensions. Four 5” and four 10” adapters allow you to lift a wide range of vehicles. These are heavy-duty adapters without the “heavy”. Because they’re made of aluminum you’ll be able to place and maneuver them without strain. They have a convenient column bracket for storage.
Arms: Forward’s heavy-duty two-post DP15Pro offers three-stage arms that can easily be extended and retracted while lying on the floor spotting a vehicle. Couple that with the light adapter extensions and you win the spotting large vehicle battle!
Stage Arms: with heavy-duty reinforced gusseting:
Extended and retracted from 61” to 30”
5 1/2” minimum adapter height from floor
Extended Height Model Options:
The DP15Pro offers three different height options, for the lowest ceiling option DP15N000 the overhead cross member mounts directly to the column without a column extension to fit a 155 ¾” (12’-11 ¾”) ceiling height. The standard height DP15N001 fits a 176” (14’-8”) ceiling height and the extended height DP15N002 fits a 200” (16’-8”) ceiling height. With all these options it’s easy to choose the best package to fit into your existing shop.
Contact Us For Pricing Information
Forward Lift DP18
View The Brochure or Manual
PRODUCT SPECS
- Capacity 15,000 lbs. (6803kg)
- 18,000 lbs. (8164kg)
- Maximum Rise with 10”
- Adapter Extensions 83″ (2120mm)
- Overall Height
- DP18N000 154-3/4″ (3930mm)
- DP18N001 175” (4445mm)
- DP18N002 199” (5054mm)
- Height to Shut-Off 147-1/4″ (3735mm)
- Overall Floor Width 154-3/8″ (3921mm)
- Width Inside Columns 119-5/8″ (3038mm)
- Drive Through Clearance 108-1/4″ (2750mm)
- Arm Reach (Min/Max) 38″ / 61″ (965mm/1549mm)
- Min. Adapter Height 5-1/2″ (139mm)
- Max. Adapter Height
with 10″ Extension 15-1/2″ (393mm) - Voltage/Amps 208V/230V, 17 amps
- Motor/Phase 1ph/2HP
- Ceiling Height Required 155-3/4″ (3956mm)
FEATURES
- 18,000 lbs. capacity for lifting most trucks and vans.
- Features symmetrical column design
- Direct-Pull Lifting – high efficiency, low maintenance technology
- Closed loop hydraulic system – protect against hydraulic contamination
- Powder coat paint is more durable than conventional coatings
- Third party tested and certified by ALI
Padded shut-off bar - Low profile arms and truck adapters
- Single point release lock at operations center
PRODUCT DESCRIPTION
DP18 Heavy Duty Two-Post Lift Features:
The DP18 is constructed of high strength heavy gauge steel columns. Large gusseting on substantial base plate foundations provide the stability and support you want for a heavy truck lift. With a capacity of 18,000 pounds your shop can start working on work trucks, vans, or small buses along with everything else that rolls through the door.
Truck Adapter Extensions:
The DP18 comes with eight high strength aircraft grade aluminum truck adapter extensions. Four 5” and four 10” adapters allow you to lift a wide range of vehicles. These are heavy duty adapters without the “heavy”. Because they’re made of aluminum you’ll be able to place and maneuver them without strain. They have a convenient column bracket for storage.
Arms: Forward’s heavy-duty two-post DP18 has two-stage arms that can easily be extended and retracted while lying on the floor spotting a vehicle. Couple that with the light adapter extensions and you win the spotting large vehicle battle!
2-STAGE ARMS with heavy-duty reinforced gusseting
Extended and retracted from 61” to 38”
5 1/2” minimum adapter height from floor
Extended Height Model Options:
The DP18 offers three different height options, for the lowest ceiling option DP18N000 the overhead cross member mounts directly to the column without a column extension to fit a 155 ¾” (12’-11 ¾”) ceiling height. The standard height DP18N001 fits a 176” (14’-8”) ceiling height and the extended height DP18N002 fits a 200” (16’-8”) ceiling height. With all these options it’s easy to choose the best package to fit into your existing shop.
Contact Us For Pricing Information
Forward Lift DP18PRO
View The Brochure or Manual
PRODUCT SPECS
- 154-3/4” (3930mm) Low Ceiling
- 175” (4445mm) Standard Extension
- 199” (5054mm) Extended Height
- Capacity 18,000 lbs. (8164kg)
- Minimum Rise 73-1/4” (1860mm)
- Max. Rise with 10” (254mm)
- Adapter Extensions 83-1/4″ (2120mm)
- Height to Shut-Off
- 147-1/4″ (3735mm) Low Ceiling
- 167-1/4” (4248mm) Standard Extension
- 191-1/4” (48514mm) Extended Height
- Overall Floor Width 154-3/8″ (3921mm)
- Width Inside Columns 119-5/8″ (3038mm)
- Drive Through Clearance 108-1/4″ (2750mm)
- Arm Reach (Min/Max) 30”/ 61” (762mm/1549mm)
- Threaded Adapter Height
- from Floor (Min/Max) 5-1/2″ to 7-1/2” (139mm)
- Max. Adapter Height
- with 10″ Extension 15-1/2″ (393mm)
- Voltage/Amps 208V/230V, 17 amps
- Motor/Phase 1ph/2HP
THREE OVERALL HEIGHT OPTIONS
- DP18PNOOOBL / RD 154-3/4” (3930mm) Low Ceiling
- DP18PNOO1BL / RD 175” (4445mm) Standard Extension
- DP18PNOO2BL / RD 199” (5054mm) Extended Height
MINIMUM REQUIRED CEILING HEIGHT
- DP15PNOOOBL 155-3/4” (3956mm) Low Ceiling
DP15PNOO1BL 176” (4470mm) Standard Extension
DP15PNOO2BL 200” (5080mm) Extended Height
FEATURES
- 18,000 lbs. capacity for lifting most trucks and vans.
- Features symmetrical column design
- Direct-Pull Lifting – high efficiency, low maintenance technology
- Closed loop hydraulic system – protect against hydraulic contamination
- Powder coat paint is more durable than conventional coatings
- Third party tested and certified by ALI
Padded shut-off bar - Low profile arms and truck adapters
- Single point release lock at operations center
PRODUCT DESCRIPTION
DP18 Heavy Duty Two-Post Lift Features:
The DP18 is constructed of high strength heavy gauge steel columns. Large gusseting on substantial base plate foundations provide the stability and support you want for a heavy truck lift. With a capacity of 18,000 pounds your shop can start working on work trucks, vans, or small buses along with everything else that rolls through the door.
Truck Adapter Extensions:
The DP18 comes with eight high strength aircraft grade aluminum truck adapter extensions. Four 5” and four 10” adapters allow you to lift a wide range of vehicles. These are heavy duty adapters without the “heavy”. Because they’re made of aluminum you’ll be able to place and maneuver them without strain. They have a convenient column bracket for storage.
Arms: Forward’s heavy-duty two-post DP18 has two-stage arms that can easily be extended and retracted while lying on the floor spotting a vehicle. Couple that with the light adapter extensions and you win the spotting large vehicle battle!
2-STAGE ARMS with heavy-duty reinforced gusseting
Extended and retracted from 61” to 38”
5 1/2” minimum adapter height from floor
Extended Height Model Options:
The DP18 offers three different height options, for the lowest ceiling option DP18N000 the overhead cross member mounts directly to the column without a column extension to fit a 155 ¾” (12’-11 ¾”) ceiling height. The standard height DP18N001 fits a 176” (14’-8”) ceiling height and the extended height DP18N002 fits a 200” (16’-8”) ceiling height. With all these options it’s easy to choose the best package to fit into your existing shop.
Contact Us For Pricing Information
Testimonials From Google and Facebook
Need a Two-Post Lift Distributor in Central California?
If you are looking for the best automotive lift distributor to help you pick the perfect equipment, Shop Equipment USA is here to help. With more than 20 years of experience and a wide variety of two-post, four-post, motorcycle, and scissor lifts plus other equipment available, you are sure to find the gear that suits your needs. Contact us today for prompt and reliable assistance!
Quality Two-Post Lift Distributor Serving California & the Greater Las Vegas Area
Serving the Inland Empire, Gold Country, and Imperial, Mendocino, Siskiyou & Ventura Counties including Hanford-Corcoran, Humbolt, Bakersfield, Chico, Fresno / Madera, Los Angeles, Merced, Modesto, Monterey Bay, Orange County, Palm Springs, Redding, Sacramento, San Diego, San Francisco Bay Area, San Luis Obispo, Santa Barbara, Santa Maria, Stockton, Susanville, Visalia-Tulare, Yuba-Sutter, Las Vegas, Henderson & Summerlin
Powered by Ignite Local | privacy policy | site map
**social media phone numbers **