Rotary Lift® / Forward Lift® FA5701 | 2-Post Tech Light Kit

The Two Post Tech Light Kit FA5701 is a purpose-built LED upgrade for busy service bays that want clear, shadow-free visibility without replacing their lift. Unlike temporary work lamps and floor lights, this Forward Lift Light Kit / Rotary Lift Light Kit mounts cleanly on two-post racks and keeps cords off the floor, improving safety and technician speed. Whether you run Forward Lift or Rotary Lift equipment—or a mix of both—the FA5701 standardizes lighting, reduces clutter, and elevates the customer experience during walk-arounds and digital inspections.

Verified Cross-Brand Compatibility (Forward Lift + Rotary Lift)

From the brackets to the wire routing, the FA5701 Two Post Tech Light Kit is designed for cross-brand use with common Forward Lift and Rotary Lift two-post architectures. That means you can upgrade multiple bays—even if one lane uses Forward and the next lane uses Rotary—while stocking a single SKU. Before ordering, verify your exact model/year and confirm mounting clearances along the posts and arms.
Why this matters:

• Mixed fleets: Many independent shops and dealer service departments operate both Forward Lift and Rotary Lift racks. One Two Post Light Kit simplifies parts, training, and maintenance.
• Future-proofing: If you swap a rack later, you can remount the FA5701 on your new Forward or Rotary lift.
• Consistency: Standard illumination across bays supports consistent QC and technician training.

What’s Included in the Two Post Light Kit

• High-output LED fixtures engineered for wide, even undercar coverage
• Cross-brand mounting brackets and fasteners for Forward Lift and Rotary Lift two-post designs
• Pre-terminated wiring harness/loom with bay-friendly switch placement
• Install guide with recommended routing to avoid pinch points and moving arms

Installation Snapshot

Most shops complete installation in a standard maintenance window. The Light Kit mounts to fixed points on the posts; routing follows protected channels to prevent interference with hydraulic lines, equalizer cables, or arm locks. For best results, stage the vehicle at working height, mark switch location where techs naturally reach, and perform a function test before closing up the harness.

Why the Two Post Tech Light Kit Pays for Itself

Faster inspections: Bright, uniform light reveals leaks, worn bushings, and hardware issues at a glance—cutting time per DVI photo and reducing callbacks.
Safer workflow: No cord reels on the floor, fewer trip hazards, less heat compared to halogen work lamps.
Better customer communication: Clear “before” photos and annotated DVI images help advisors explain necessary work, raising approval rates and ARO.
Lower operating cost: LED efficiency means minimal power draw and less heat, with long service life and wipe-clean lenses.

Use Cases That Benefit Most

• Brake & steering/suspension checks: Clear sight lines to pads, hoses, ball joints, tie-rod ends, and bushings.
• Leak verification: Oil, ATF, coolant, power steering, differential seep—bright light confirms sources quickly.
• Exhaust & shields: Spot loose mounts or heat-shield rattle points fast.
• Pre-alignment checks: On two-post lifts, quickly identify components that will affect toe/camber/caster before moving to your alignment bay.

Specs & Care (Typical)

• LED, wide-beam distribution tailored for undercar clarity
• Low current draw for minimal impact on existing circuits
• Cool-running fixtures for comfort and safety
• Durable, wipe-clean lenses (avoid harsh solvents)
  (Exact specs may vary by revision; always follow the included guide.)