Forward Lift® I10 | Symmetrical Two Post Lift
Original price was: $8,163.00.$5,347.00Current price is: $5,347.00.
Frame engaging rubber padded truck adapters with multiple extensions to raise most vehicles on the road today. Includes four (each) adapter extensions at 3.5″ and 5″.
Spot-Rite™ 3-Stage Front Arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.
ADDITIONAL FEATURES:
- 10,000 lbs. capacity for raising most passenger cars, trucks and vans.
- The I10 has been third party tested by ETL and approved by ALI.
- 3-stage front arm design enables you to position doors in front of the column or behind to avoid door damage.
- Includes adjustable frame contact adapters.
- Adapter storage bracket kit.
- Hydraulic cylinders in each column:
- Top-mounted | Direct pull lifting technology | Cylinder rod concealed inside the carriage
ALI GOLD CERTIFIED
Spot-Rite™ 3-Stage Front Arm Design
Accommodates vehicle spotting both symmetrically and asymmetrically.
Position the vehicle doors in front of or behind the lift columns to prevent door damage and allow easy technician access!
T100295 Extended Height Kit
The column extension kit is used to add an additional 2 feet (609.6 mm) to the top of the standard lift. This kit includes an extended length hose, return line, and cables to accommodate the extended height. Existing hardware included with the lift is used to attach the extensions.
INCLUDES LOW-PROFILE THREADED ADAPTERS AND (4 each) ADAPTER EXTENSIONS AT 3.5″ and 5″
ADDITIONAL FEATURES:
- Symmetrical column design
- Spot-Rite™ 3-stage front arm design – spot vehicles asymmetrically or symmetrically
- Top mounted Direct-Pull lifting technology
- Cylinder rod concealed in carriage
- Adjustable width options
- Optional extended height kit adds 2’
- Single point lock release
- Powder coated finish
- Includes adapter storage bracket
| Weight | 1600 lbs |
|---|---|
| Dimensions | 148 × 22 × 42 in |
| Capacity | 10,000 lbs |
| Max Rise | 76 1/4" With 5" Extension |
| Overall Height | 143", 165" (Optional Extension) |
| Overall Width | 137" (Optional), 129" |
| Drive Through Clearance | 99", 105" (Optional) |
| Overhead Switch Height | 137 1/8" |
| Front Arm Reach | 23" (Min), 44 3/8" (Max) |
| Rear Arm Reach | 36" (Min), 58" (Max) |
| Minimum Adapter Height | 3 3/4" Without Extension |
| Max Adapter Height | 8 3/4" With 5" Extension |
| Width Inside Columns | 109", 115" (Optional) |
| Ceiling Height Required | 12 ft |
| Voltage | 17 amps, 208/230v |
| Motor | 60Hz, Single Phase, 2HP |
| Lift Color Options | Blue, Red |